Lighting Repairs and Replacement

When a light stops working, flickers, or becomes difficult to access safely, it usually needs repairing or replacing rather than being left as it is. Surrey Handyman carries out lighting repairs and replacement in homes, dealing with failed fittings, worn components, and hard to reach bulbs. We work carefully to make sure lights are secure, working properly, and safe to use, leaving everything tidy once the job is done.

Book Now
5 Star Rated on Google
4.9 Star rated on Trustpilot

Book an Electrician for Lighting Repairs and Replacement

Booking lighting repairs or replacement with Surrey Handyman is straightforward. Get in touch and let us know what the issue is, such as a light that has stopped working, flickering fittings, or bulbs that are hard to reach safely. This helps us understand the problem, allow the right amount of time, and bring the correct parts or access equipment. We will also advise if there is anything worth checking in advance so the work runs smoothly on the day.

Book Now
Time

How Long Does a Lighting Repair or Replacement Take

Many lighting repairs or replacements can be completed within 30 to 60 minutes, depending on the type of light and how easy it is to access. Simple jobs such as replacing a failed fitting, securing a loose light, or changing hard to reach bulbs are often straightforward.

More involved work, such as diagnosing a flickering light, replacing multiple fittings, or working in awkward locations like stairwells or high ceilings, can take longer. If access equipment is needed or the cause of the fault needs further investigation, we will explain this when booking so you have a clear idea of how long to expect.

How much does it cost to Repair or Replace Lighting?

Note: There is no VAT in addition to the rates above

What to Expect When We Carry Out Lighting Repairs or Replacement

Lighting work is usually about identifying why a light is not working properly and fixing it safely so it can be used with confidence. Whether the issue is a failed fitting, flickering light, or a bulb that is difficult to access, the work is carried out carefully and methodically.

Assessing the lighting issue

We start by checking the light or fitting and how it is behaving, such as not turning on, flickering, or feeling loose. This helps identify whether the problem is with the bulb, fitting, switch, or connection.

Isolating and making the area safe

Before carrying out any work, the relevant circuit is isolated so the job can be done safely. Where lights are high up or awkward to reach, suitable access equipment is used to avoid damage and reduce risk

Repairing or replacing the fitting

Faulty components are repaired or replaced as needed. This may involve changing a bulb, securing or replacing a fitting, or swapping a light for a like for like replacement so everything works as intended.

Testing the light

Once the work is complete, the light is tested to make sure it is working properly and operating safely. We check that fittings are secure and that there are no ongoing issues.

Leaving everything tidy

After testing, the area is left tidy and safe to use. You are welcome to check the light before we leave and ask any questions about the work that has been carried out.

Other Electrical Jobs We Can Help With

If you are booking lighting repairs or replacement, it is often a good time to deal with other small electrical jobs while we are on site. Some issues can be checked or resolved during the same visit, especially where access or isolation is already in place.

We can also help with:

  • Replacing switches or plug sockets
  • Fitting or replacing extractor fans
  • Changing smoke or carbon monoxide alarms
  • Dealing with minor electrical faults around the home

If you have a few outdoor jobs planned, let us know when booking so we can allow enough time and carry out the work safely and neatly.

Book Now

Customer Testimonals

Guildford, Surrey
5 star rated on Trustpilot
Surrey
5 star rated on Google
Guildford, Surrey

★★★★★

How We Make It Easy

Lighting Repairs and Replacement FAQs

Yes. We regularly change bulbs in hard to reach places such as stairwells, high ceilings, and awkward locations, using suitable access equipment so the job is done safely.

If replacing the bulb does not resolve the issue, we will check the fitting, switch, or connection to identify the cause. Many lighting problems are due to worn fittings or loose connections rather than the bulb itself.

Yes. We can replace complete light fittings with like for like alternatives where required. This will be discussed before any work is carried out.

Yes. Flickering lights are often caused by loose connections, failing fittings, or worn components. We will assess the issue and advise on the best way to resolve it.

Yes. The relevant circuit will be isolated while work is carried out so it can be done safely. Power is restored once the work is complete and the light has been tested.

Yes. We carry out repairs and replacement for both interior and exterior lighting, depending on access and the condition of the fitting.

Find your Local Handyman

If you need a reliable handyman to repair or replace lighting, we work all across Surrey. You can book help in your area quickly and easily, with local handymen available in the main Surrey towns and nearby villages.

Book Now