EV Charger Installation for Homes in Surrey
Installing an EV charger at home involves more than simply mounting a unit on the wall. It requires a dedicated circuit, correct protection, load assessment and full compliance with UK wiring regulations. Surrey Handyman provides EV charger installation across Surrey using qualified electricians, ensuring your charger is safely installed, properly tested and certified for long term use. Whether you are charging overnight or managing smart tariffs, we make sure your installation is done correctly from the start.
Book an Electrician to Install an EV Charger
Booking an electrician to install an EV charger is straightforward with Surrey Handyman. We arrange for a qualified electrician to assess your property, confirm the most suitable charger location and check that your existing electrical system can safely support the installation. From the first enquiry through to completion, we provide clear communication and practical advice, ensuring the charger is installed neatly, safely and fully in line with current UK wiring regulations.
If you are unsure which charger to choose or whether your consumer unit has capacity, we can advise before installation so everything is planned properly from the outset.
How Long Does EV Charger Installation Take?
Most EV charger installations take between half a day and one full day, depending on the layout of your property and the work involved.
The time required will vary based on the distance between the consumer unit and the charger position, the route the cabling needs to take and whether any electrical upgrades are required before installation. Where additional protection or a consumer unit upgrade is needed, this can extend the appointment slightly.
We will confirm the expected timescale after assessing your property so you know exactly what to expect on the day.
How much does it cost to Install a EV Charger?
Install EV Charger
Approximately 4 - 8 Hours
Monday to Saturday: 8am – 6pm
£75 first hour, minimum charge of 1 hour
£18.75 per ¼ hour thereafter
Payment
Secure & Simple
Payment Accepted by Card, Bacs or Cheque
You simply pay your Handyman at the end of the visit and you will receive a PDF receipt straight away.
Booking
Speak to a human
Call or Book online
You can book online or speak to our friendly booking office if you prefer to talk things through first.
Note: There is no VAT in addition to the rates above
What to Expect When We Install Your EV Charger
Installing an EV charger safely involves careful planning, correct protection and full compliance with current UK wiring regulations. When your electrician arrives, they will assess the property, confirm the agreed position and ensure the electrical system is suitable before any work begins. The focus is on safe installation, neat cable routing and proper testing so your charger performs reliably for years to come.
We assess your electrical supply first
Before installation begins, we check the capacity of your existing electrical system. This includes reviewing the consumer unit, confirming available load and ensuring the earthing arrangement is suitable. If upgrades are required, these are explained clearly before work proceeds.
Dedicated circuit installation
EV chargers require a dedicated circuit. We install the appropriate cabling from the consumer unit to the charger location, ensuring correct protection devices are fitted in line with current regulations.
Safe positioning and secure mounting
We confirm the charger position based on your parking layout, cable reach and accessibility. The unit is mounted securely to a suitable surface and positioned for practical day to day use.
Neat cable routing
Cabling is routed as cleanly and discreetly as possible. Where external runs are required, we use appropriate containment and ensure the installation looks tidy and professional.
Full testing and certification
Once installed, the system is fully tested to ensure safe operation. You will receive the appropriate electrical certification confirming the installation complies with UK wiring regulations.
Clear guidance before we leave
Before completion, we walk you through how the charger operates and answer any questions you may have. You can check the installation and confirm everything is positioned correctly before we leave.
Other Electrical Installation & Upgrade Services
Alongside EV charger installation, our electricians can help with a range of electrical installation and upgrade work around your home. Whether you are improving safety, increasing capacity or updating older wiring, we can carry out the work safely and in line with current regulations.
We also assist with:
- Consumer unit upgrades
- Electrical safety inspections and testing
- Installing additional sockets on existing circuits
- Outdoor electrical installations
- Replacing light fittings and switches
- Electrical fault finding
If there is anything else electrical that needs attention, just mention it when booking and we can advise on what can be looked at at the same time.
Customer Testimonals
How We Make It Easy
Quick Responses
Speak to a real person and get fast updates from start to finish.
Clear Arrival Times
Your handyman confirms the time and keeps you updated along the way.
Respect for Your Home
Polite, tidy and careful at all times, with minimal disruption.
Jobs Done Properly
Quality workmanship from experienced handymen who take pride in the details.
EV Charger Installation FAQs
In most domestic properties, planning permission is not required when the charger is installed on a private driveway or wall and meets permitted development rules. If your property is listed or in a conservation area, additional checks may be needed.
Possibly. If your existing consumer unit does not have sufficient capacity or does not meet current safety standards, an upgrade may be recommended before the EV charger is installed. We will assess this before work begins.
No. EV charger installation requires a dedicated circuit, appropriate protection and compliance with UK wiring regulations. It should always be carried out by a qualified electrician.
The charger can usually be installed several metres from the consumer unit, but longer cable runs may affect installation time and cost. We assess the most practical route before confirming the work.
Yes. Most EV chargers are designed for external use and are weather rated for UK conditions. We ensure the unit is mounted securely and positioned safely.
Yes. After installation and testing, you will receive the relevant electrical certification confirming the work complies with current UK wiring regulations.
Yes. If you already have a charger, we can install it provided it meets UK standards. If you are unsure which unit to choose, we can advise before installation.
Most installations take between half a day and one full day, depending on cable routing, property layout and whether any electrical upgrades are required.
Find your Local Handyman
If you need a reliable handyman to install an EV Charger, we work all across Surrey. You can book help in your area quickly and easily, with local handymen available in the main Surrey towns and nearby villages.
