Kitchen Tap Replacement and Installation in Surrey

Replacing a kitchen tap is a common job, but it still needs care to make sure everything lines up properly and stays leak free. Old taps can seize, fittings can be awkward to reach and pipework can be unforgiving if rushed. We replace and install kitchen taps for homes across Surrey, removing the old tap, fitting the new one securely and checking all connections before we leave. Whether you are dealing with a drip or updating your kitchen, the job is handled neatly and with minimal disruption.

Book Now
5 Star Rated on Google
4.9 Star rated on Trustpilot
Hanging Mirror

Book a Plumber to Change Your Kitchen Tap

Surrey Handyman provides a reliable kitchen tap replacement service for homes across Surrey. This is a plumbing job we carry out regularly, whether you are swapping a faulty tap or fitting a new one as part of a kitchen update. We arrive with the tools needed to remove the old tap, connect the new fittings properly and make sure everything is secure and leak free before we leave. Booking is straightforward, and we will talk through the tap type and access beforehand so the work runs smoothly on the day.

Book Now
Time

How Long Does Changing a Kitchen Tap Take?

If your kitchen tap does not have local isolating valves, turning off the water can sometimes be the most time consuming part of the job. Knowing where your main stop valve is and making sure it is accessible can help speed things up. This may be beneath the sink, outside the front of the house or in other less obvious locations, particularly in homes that have been extended over time.

If your stop valve is stiff or has not been moved for a while, spraying it with a penetrating oil before the visit can help. In most cases, we are able to free up exposed corroded valves if needed.

As a general guide, changing a kitchen tap usually takes 45 to 90 minutes, depending on access and the condition of the existing fittings. This allows time to isolate the water, remove the old tap, fit the new one and check everything is secure and leak free.

How much does it cost to Change a Kitchen Tap?

Note: There is no VAT in addition to the rates above

Hanging Doors

What to Expect When We Change Your Kitchen Tap

Changing a kitchen tap is a fairly small job, but doing it properly makes a big difference to how well it works and how long it lasts. When your plumber arrives, the work is carried out carefully and methodically to avoid leaks or damage.

Isolating the water supply

The water supply is isolated either using local isolating valves or the main stop valve. If valves are stiff or awkward to reach, we deal with this carefully to avoid causing problems.

Removing the old tap

The existing tap is disconnected and removed, including old fixings and seals. Care is taken around worktops and sinks to avoid damage during removal.

Fitting the new tap

The new kitchen tap is positioned and secured properly, with all connections tightened and sealed correctly. Flexible hoses and fittings are checked to make sure everything sits as it should.

Testing for leaks

Once fitted, the water is turned back on and the tap is tested thoroughly. We check all connections for leaks and make sure the tap operates smoothly.

Leaving the area tidy

After the work is complete, we tidy the area under the sink and around the worktop. You are welcome to check the tap before we leave to make sure you are happy with the installation.

Paul - Door Hanging

Other Plumbing Jobs We Can Help With

If you are booking a kitchen tap replacement, it is often a good time to deal with a few related plumbing jobs while we are on site. These are common requests that can usually be handled during the same visit.

We can also help with:

  • Replacing silicone sealant around sinks, basins or baths
  • Fitting local isolating valves where taps do not already have them
  • Installing an outside tap when access is available from the kitchen
  • Changing bathroom taps, including basin and bath taps

If you are planning more than one small plumbing update, just let us know when booking so we can allow enough time and talk through what makes sense to do together.

Book Now

Customer Testimonals

Guildford, Surrey
5 star rated on Trustpilot
Surrey
5 star rated on Google
Guildford, Surrey

★★★★★

How We Make It Easy

Kitchen Tap Replacement FAQs

We are happy to fit a kitchen tap you have already purchased. If you would like us to supply the tap, let us know when booking so we can discuss suitable options.

We can fit most standard kitchen taps, including mixer taps and mono block taps. If you are unsure whether your chosen tap is suitable, we can advise before the visit.

It helps if the area under the sink is cleared so there is good access to the pipework. If you know where your main stop valve is, making sure it is accessible can also save time.

Older taps and fixings can sometimes be stiff or corroded. We deal with this carefully and can usually remove seized fittings without issue. If anything unexpected comes up, we will explain it before proceeding.

Yes. Once the new tap is installed, we turn the water back on and check all connections carefully to make sure everything is secure and leak free before we leave.

Yes. If your kitchen taps do not have local isolating valves, we can usually fit them during the same visit, making future maintenance much easier.

Yes. If you have other minor plumbing problems, such as a running toilet or small leak, let us know when booking and we can often deal with them during the same appointment.

Find your Local Plumber

If you need a reliable plumber to replace a kitchen tap, we work all across Surrey. You can book help in your area quickly and easily, with local handymen available in the main Surrey towns and nearby villages.

Book Now